Home > > Side Entry Ball Valve And Lug Butterfly Valve - Differences
Side Entry Ball Valve And Lug Butterfly Valve - Differences 2012-02-01
Valves are mechanical devices that controls the flow and pressure within a system or process. They are essential components of a piping system that conveys liquids, gases, vapors, slurries etc..
Different types of valves are available: gate, globe, plug, ball, butterfly, check, diaphragm, pinch, pressure relief, and control valves. Each of these types has a number of models, each with different features and functional capabilities. Some valves are self-operated while others manually or with an actuator or pneumatic or hydraulic is operated.
A ball valve is (in simplest terms) a ball with a hole running through it. Turning the valve positions the hole to either block, partially block or complete the line of flow through the valve.
Advantages of ball valves include a good seal, or little to no leak-by when the valve is fully closed. A ball valve will turn regardless of the pressure on the supply side. If the hole through the valve is as large or larger than the supply pipe inner diameter, the ball valve will offer essentially no pressure drop or restriction when fully opened.
Ball valves are often used in high pressure liquid or gas lines, usually 6 inches or less in diameter, where a complete cut off is important.
A butterfly valve is a disk mounted on a rotating shaft. When fully closed, the disk completely blocks the line. When fully opened, the disk is at a right angle to the flow of gas or liquid.
One of the advantages for butterfly valves is that they are relatively inexpensive to build and maintain. They are the most common valve for large volume water systems such as municipal water works. They can be used for dirty liquid applications such as sewage or controlling river water.
The butterfly valve disk is still in the valve flow line when fully open, so there will always be a pressure drop across a butterfly valve. Also, if the pressure difference across the butterfly valve is great, it may be difficult to open the valve. Some applications require a bypass valve to bring the pressure difference down before large butterfly valves can operate.
Differences
Butterfly valves are less expensive and generally lighter weight than other types of valves. A butterfly valve for a large diameter pipe is much smaller than its ball valve equivalent.
Butterfly valves do not seal as completely as ball valves and are rarely used to control gas flows. Ball valves provide a reliable seal.
In high pressure applications, the ball valve will provide superior cut-off characteristics as well as having no trouble turning or needing a pressure-balancing scheme.
If you want to know more about Brass Valve,please enter the following link:Slab Gate Valve.